TG Metal Works

Type 304 stainless steel · 18 ga · No. 4 finish

Stainless lockers built to your drawing

One, two and three tier lockers with flush doors, cut on our laser and assembled in our shop in Shenandoah, Pennsylvania. Any size, any lock, any cutout, engraved if you want it.

Bank of 7 · double tier · floating15" W × 18" D × 78" H
18 gabody and doors, not 24 ga
1/16"any size, to the sixteenth
2 to 4 weeksafter you approve the drawing
from $815per single tier locker

Lineup

Four ways to stack a locker

Standard widths are 12", 15" and 18". Every model below is a starting point: change any dimension in the configurator.

Catalog

Pick a series, then a size

1,200 standard variants, each with a price: six series, four widths, five depths, five heights, in 304 or 316L. Add a door style, base and lock. Anything outside the list is custom and still welcome.

Width
Depth
Height
Material
Door
Base
Lock

    Per module, flush door, closed plinth, no lock. Tap a price to select it.

    Standard on every locker

    • Body and doors18 ga stainless, No. 4 brushed, grain vertical on doors.
    • DoorFlush single sheet on pivot hinges, magnetic catch, finger pull.
    • InsideTwo coat hooks per door.
    • TopFlat. Sloped top as an option.
    • AssemblyRiveted. Ships assembled with doors hung and locks fitted.
    • CustomAny size to 1/16", any cutout, any lock, engraving on request.

    Options price list

    Configurator

    Size it, see it, price it

    The elevation and the price follow every change. Sizes are per module, in inches.

    Tiers
    Size per module

    Width 9" to 24", depth 10" to 30", height 24" to 90". Larger sizes are quoted from your drawing.

    Door
    Lock
    Base
    Top
    Engraving
    Material
    Extras
    TGL-2T
    Budget price, 7 modules
    $0
    ItemEachAmount

    Budget prices, before sales tax, delivery and installation. A firm quote follows with the shop drawing.

    Paste the request into an email to info.tgglass@gmail.com or call 917 294 7720.

    Custom work

    Change anything on any locker

    Every order is cut from sheet for that order, so a change is a line in the drawing, not a special product.

    Size

    Any width, depth and height

    Fill an alcove wall to wall, match a bench height or line up with tile joints. We work to 1/16".

    Engraving

    Numbers, names and logos

    Laser engraved on the door face, or cut through as a pattern. Sequential numbering comes off your list.

    Cutouts

    Vents, cable ports, pass-throughs

    Vent slots in any pattern, charging-cable ports, mail slots, viewing windows, drain holes in the pans.

    Locks

    Any lock, cut to its template

    Padlock hasp, keyed cam, combination, keypad or RFID. Send your own lock and we cut for it, fit it and test every door.

    Doors

    Flush, vented or double-skin

    Single-sheet flush doors on pivot hinges with a magnetic catch, or 3/4" double-skin doors on concealed soft-close hinges.

    Mounting

    Plinth, legs or floating

    Closed plinth, 6" legs for wash-down floors, or hung off the wall on a steel frame with a floating bench in front.

    Tops and ends

    Sloped tops, finished ends

    Sloped tops keep dust and clutter off. Exposed ends get a finished No. 4 panel with no fasteners on the face.

    Material

    304 or 316L

    Type 304 for most rooms. 316L where chlorides are in the air: pools, coastal sites, harsh cleaners.

    Interiors

    Hooks, shelves, rods

    Two coat hooks per door are standard. Add shelves, hang rods, shoe trays or dividers where you need them.

    Compare

    Against a stock stainless locker

    TG Metal WorksStock catalog locker
    Body18 ga type 30424 ga type 304
    DoorFlush 18 ga, or 3/4" double-skin16 ga with louvers
    SizesAny, to 1/16"12" or 18" wide, 18" deep, 78" high
    Handle and lockFinger pull, any lock cut to templateRecessed handle with padlock hasp
    BasePlinth, legs or floating6" legs
    MarkingEngraved numbers and logosNumber plates
    Lead time2 to 4 weeks from approved drawingAbout 20 business days
    Double tier, 12" wide$905$1,112 to $1,345

    Stock figures are published specifications and online prices for a widely sold 304 stainless locker, checked November 2026. Our price is the configurator price for 12" W × 18" D × 72" H with a flush door and no lock.

    Where they go

    Rooms that need stainless

    • Gyms and spasFlush doors, floating benches, keypad or RFID locks.
    • Pools and showers316L, vented doors, legs or floating off a wet floor.
    • HealthcareSloped tops, wipe-down faces, no ledges to hold dust.
    • Labs and cleanroomsGowning rooms, sloped tops, closed plinth.
    • Food and beverageWash-down legs, drain holes, padlock hasps.
    • Staff roomsBox lockers for phones and bags, numbered doors.

    Process

    From size to site

    1. Send the sizesWall length, height, tiers and lock. A sketch or an architect's sheet is enough.
    2. Approve the shop drawingYou get a dimensioned drawing and a firm quote. Nothing is cut before you sign it.
    3. We cut, form and assembleLaser cut and formed in our shop. Locks are fitted and every door is tested before it leaves.
    4. Delivery or installationOur own truck covers New York, New Jersey and Pennsylvania. Freight anywhere else.

    Questions

    Before you order

    Is there a minimum order?

    No. One module is fine. Banks are built as modules that bolt together on site.

    Do they arrive assembled?

    Yes. Modules ship assembled with doors hung and locks fitted. On site they are levelled, bolted together and anchored.

    Can you use the locks we already bought?

    Yes. Send the lock or its template. We cut the door for it, fit it and test it in the shop.

    What does the finish look like?

    No. 4 brushed on every face you see, with the grain running vertically on doors. Mirror and bead-blast finishes are quoted on request.

    How do payments work?

    50% deposit when you approve the drawing, balance within 15 days of completion.